Skip to main content

Maintenance Tips and Tricks to Follow After an Iron Gate Installation in Norman

For centuries, the wrought iron gate has been used to keep enemies from invading castles. After all these years, it hasn’t lost its appeal and modern architects and designers are still installing iron gates in homes. These gorgeous gates can have an aesthetic appeal while serving as a steel proof security barrier. 

According to Fence Builders of Austin, iron gates and fences can be very durable. They provide extra security to homes and are found in a variety of designs. They can have the functionality of a front door, side gate, or main entrance.  You have the option of connecting them to an automatic electrical gate system or with a manual lock and key. 

grayscale photography of gate

There aren’t many disadvantages to having an iron gate, except for the fact that you have to take extra good care of it. Maintaining an iron gate is vital to its durability and sustainability. 

To keep your iron gates in good shape, follow these maintenance tips. 

1. Paint 

Paint is an excellent undercoat that serves as a protector. It’s important that you paint the gate with an oil-based paint. Oil-based paints won’t chip off when exposed to extreme weathers. 

You will find oil-based paints that is specifically designed for metal. Even though they are a bit more expensive than typical house exterior paints, they will save you a lot of money and effort in the long haul. 

Make sure you do touch-up paint jobs every 6-10 months, in places where the paint might have faded or got damaged. 

2. Apply a Protective Coat


In order to keep your iron gate in good condition you have to protect it from weather elements. Iron gates are prone to rusting when they are exposed to humidity, scorching heat, and rain. 

Apply a wax, specifically designed for iron fences and gates, to prevent rust and weather damage. This special wax should be re-applied on top of the base paint coats, every 6-8 months. 

3. Remove Vegetation

Plants can be extremely harmful to an iron gate. Strong roots can grow through hinges and damage the protective oil-based paint and wax coat. Especially when gates are used as entrances to gardens, you need to take extra care in removing any vegetation that might creep its way through the outer layer. 

When you are installing a new iron gate for your home in Norman, you have to make sure that you remove any grass, weeds, and vines from the area. Place tarps over surrounding vegetation to avoid regrowth into the iron gate’s paint. 

4. Hinges 

Iron gates usually come with an array of different hinges. When water enters the hinges, over time they will rust. Being exposed to extreme heat will also cause hinges to become extremely dry. When hinges are rusty or dry, they will make squeaking noises. 

Avoid permanent damage by applying a high-grade lubricant. Lubricants prevent dryness and moistens up the hinge parts. It also serves as a protective layer against water and sun.

You can learn more about iron gate hinges here: https://www.topqualitydoors.net/

white steel window grill

5. Replace Parts

When your iron gate has seen better days, it will be best to replace parts that aren’t working anymore. Locks and hinges are the most common iron gate parts that will need replacement. 

Use this opportunity to modernize your gate’s appearance by adding uniquely designed handles, locks, fasteners, and decorative cast iron sculptures. Click here to find out what kind of iron you should consider when replacing parts. 

6. Dealing with Rust

If you’ve neglected your iron gate and rust has already formed in corners and surfaces, then you can recover minor damage.  If the damage is too severe you are going to have to install a brand-new iron gate.

First, you need to rinse the entire area with lukewarm water and a nonionic cleaner. Wait for the gate to dry before applying a rust converter to areas where rust has already formed. The rust converter should be tannic-acid-based or phosphoric-acid based. Remember to wear protective gear when working with these acids. 

Before re-applying oil-based paints to the treated areas, you should apply a thin layer of primer. Primers are also oil-based and specifically designed for iron. 

You can consult an expert to help you with this process, if you don’t feel too confident in doing it. 

As long as you take good care of your newly installed iron gate, it will have a long and durable life. 

Yogesh Mankani

Yogesh is a professional freelance content writer who loves everything about online world. His interest varies from gadgets to design to futuristic concepts, amazing architectures, and everything that promises to enhance the lifestyle and user-experience.

Leave a Reply

Your email address will not be published. Required fields are marked *